Send Email
Facebook
Twitter
Linkedin
Youtube
UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Simbi Imba Dzimba Mvura Inonaya Kurapa
Applications
●Kugadzirwa kwemvura yemamineral, mvura yemugomo chitubu uye imwe mvura isina utachiona.
●Kunwisa mvura yemupombi, pamusoro pemvura, yemugodhi nemvura yemurwizi.
● Pre-kurapwa kweRO mudziyo.
● Kurapa, kushandiswazve uye kushandiswazve kwemvura inoraswa mumaindasitiri.
Filtration Performance
Zvinoenderana nemamiriro ebasa eakagadziridzwa PVC hollow fiber ultrafiltration membrane iyo inoiswa kune akasiyana masosi emvura, chigadzirwa chinoratidzwa kusvika pazasi kusefa mhedzisiro:
| Kuumbwa kwemvura | Kusefa Effect |
| Zvinhu Zvakamiswa, Zvikamu> 1um | Removal Rate ≥99% |
| SDI | ≤ 3 |
| Utachiona, Utachiona | > 4 log |
| Turbidity | |
| TOC | Removal Rate 0-25% |
Pamusoro data inowanikwa kana turbidity yemvura yekudyisa isingasviki 15NTU. Chigadzirwa chinoratidzwa kusvika kune hutsanana mwero wemvura yekunwa neHutano Dhipatimendi reGuangdong Province. Nhamba yemvumo ndeye YUE WEI SHUI ZI 2014 S1671.
Product Parameters
Chigadzirwa Chitarisiko
Mufananidzo 1 Product Dimensions
Technical Parameters
| Chimiro | mukati-kunze |
| Membrane Material | Yakagadziriswa PVC |
| MWCO | 100K Dalton |
| Nominal Membrane Area | 16.5m2 |
| Diaphragms ID/OD | 1.0mm/1.8mm |
| Module Dimensions | Φ180mm×1382mm |
| Connector Dimensions | DN25 Female Thread |
Application Data
| Mvura Yakachena Flux | 7,000L/H (0.15MPa, 25℃) |
| Yakagadzirwa Flux | 35-100L/H (0.15MPa, 25℃) |
| Operating Pressure | ≤0.2MPa |
| Maximum Trans Membrane Pressure | 0.2MPa |
| Maximum Operating Temperature | 45℃ |
| Kushanda PH Range | 4-10 |
| Kugeza PH Range | 2-12 |
| Operating Mode | Cross-flow/Dead-end Filtration |
Dyisa Zvinodiwa Mvura
Sefa yekuchengetedza, chaiyo
| Kudyisa Mvura Yakasviba | ≤15NTU |
| Mafuta & Girisi | ≤2mg/L |
| Dyisa Mvura SS | ≤20mg/L |
| Total Iron | ≤1mg/L |
| Kuramba Kudyisa Residual Chlorine | ≤5ppm |
| COD | Zvinokurudzirwa ≤500mg/L |
Component Material
| Chikamu | Material |
| Membrane | Yakagadziriswa PVC |
| Kuisa chisimbiso | Epoxy Resins |
| Housing | SUS304 |
?
Typical Operating Parameters
| Maximum Backwashing Pressure | 0.2MPa | |
| Backwashing Flow Rate | 100-150L/m2.h | |
| Backwashing Frequency | Ese 30-60 maminitsi | |
| Backwashing Duration | 30-60 masekondi | |
| CEB Frequency | 0-4 nguva / zuva | |
| CEB Nguva | 5-10 maminitsi | |
| CIP Frequency | 1-3 mwedzi | |
| General Washing Chemicals: | ||
| Disinfection | 15ppm NaClO | |
| Organic Contamination Washing | 0.2% NaCl + 0.1% NaOH | |
| Inorganic Contamination Washing | 1-2% Citric Acid / 0.2% HCl | |