UF Membrane Module PVC Ultrafiltration Membrane Module UFc8040 RO housing

Product Overview

UFc8040 capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

product details

Product Tags

Applications

Production of mineral water, spring water, or other sterile liquid.
Drinking treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service?conditions of different water sources:

Ingredient	Effect
SS, Particles?> 1μm	Removal Rate?≥ 99%
SDI	≤ 3
Bacteria, Viruses	>?4 log
Turbidity	<0. 1NTU
TOC	Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products.

Product Parameters

Technical Parameters

Filtering?Type	inside-out
Membrane?Material	Modified?PVC
MWCO	100K Dalton
Membrane?Area	19m²
Membrane?ID/OD	1.0mm/1.8mm
Dimensions	Φ200mm*1016mm
Connector?Size	Φ29mm

Application Data

Pure?Water?Flux	5,000L/H?(0.15MPa, 25℃)
Designed?Flux	35-100L/m².hr (0.15MPa, 25℃)
Suggested?Working?Pressure	≤ 0.2MPa
Maximum?Transmembrane?Pressure	0.2MPa
Maximum?Working?Temperature	45℃
PH?Range	Working: 4-10; Washing: 2-12
Operating?Mode	Cross-flow?or?Dead-end

Feeding Water Requirements

Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.

Turbidity	≤ 15NTU
Oil?&?Grease	≤?2mg/L
SS	≤ 20mg/L
Total?Iron	≤?1mg/L
Continuous?Residual?Chlorine	≤?5ppm
COD	Suggested?≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters

Maximum?Backwashing?Pressure	0.2MPa
Backwashing?Flow?Rate	100-150L/m².hr
Backwashing?Frequency	Every?30-60min.
Backwashing?Duration	30-60s
CEB?Frequency	0-4 times per day
CEB?Duration	5-10min.
CIP?Frequency	Every 1-3 months
Washing?Chemicals:
Sterilization	15ppm Sodium Hypochlorite
Organic?Pollution?Washing	0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic?Pollution?Washing	1-2% Citric?Acid/0.2% Hydrochloric?Acid